Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Elf Gnome Free Crochet Pattern, I want to give you some information about this pattern;

Legend:
sc – single crochet;
magic ring – amigurumi ring;
inc – increase (knit 2 columns from 1 loop of the previous row);
sl-st – connecting column;
dec – decrease (knit 2 columns with a common top);
ch – air loop;
psn – half-column with a crochet;
(….)x… – repeat the specified number of times indicated in brackets;
(6) – the number of columns in a row;
z / n – we knit for the back half-loop;
p / p – front half-loop.
Necessary materials:
- yarn Yarn Art Jeans color 73 – 1/3 hank, color 01-very little, color 76 – for
collar and cuffs, color 52 – for shoes, color 47-1/2 skeins, color 51 – 1//2 skeins,
some color 40; - hook number 2.0;
- depending on the design of the face, felt white, black and blue, or
acrylic paints of the same colors; - thick cardboard or plastic for insoles;
- filler.
When using the indicated materials and the hook, the growth of the dwarf, excluding the hat, is 25cm.
Growth may vary, depending on the density of knitting. Stuff the toy as you go
knitting
We start knitting with fingers. You will need to tie 2 sets of fingers for two hands.
We knit with color No. 73.
Thumb:
1p) 6sc in magic ring (6)
2p) 6sc (6)
3p) 6sc (6)
Fasten the thread and cut.
Other fingers (3pcs)
1p) 6sc in magic ring(6)
2p) 6sc (6)
3p) 6sc (6)
4p) 6sc (6)
At two fingers we fix the thread and
cut off, the third one does not, continue
knit a pen.
Hand
1p) 3sc on the 1st finger, 3sc on the 2nd finger, 6sc on the 3rd finger, 3sc on the 2nd finger, 3sc
1st finger (18)
2p) inc, 8sc, inc, 8sc (20)
3p) 20sc (20)
We knit the next 2 rows differently for each handle.
Left hand
4p) 2sc capturing the loops of the thumb and hand, 18sc on the hand (20)
5p) 4sc on the thumb, 18sc on the hand (22)
Right hand
4p) 8sc on the hand, 2sc grabbing the loops of the thumb and hand, 10sc on the hand (20)
5p) 8sc on the hand, 4sc on the finger, 10sc on the hand (22)
Then we knit in the same way.
6p) 22sc (22)
7r) 2dec, 7sc, 2dec, 7sc (18
Change the thread to blue, knit a sleeve
8r) We knit for s / n (5sc, inc) x3 (21)
9-13r) 21sc (21)
14r) 4sc, 3dec, 6sc, (3sc in 1 loop) x2, 3sc (22)
15r) 22sc (22)
16r) 5sc, 2inc, 7sc, 2dec, 4sc (22)
17-23r) 22sc (22)
Fasten and cut the thread on the right handle. Knit another 3 sc on the left handle, fasten the thread
and cut.
Stuff the hands. If desired, insert wire into the handles
Boot (2pcs)
We knit with green thread
Boot top
1p) 4sc (4)
2p) (1sc, inc) x2 (6)
3p) (1sc, inc) x3 (9)
4p) 3sc, 3slst, 3sc (9)
5p) (2sc, inc) x3 (12)
6p) 4sc, 4slst, 4sc (12)
7p) (3sc, inc) x3 (15)
8p) 6sc, 3inc, 6sc (18)
9p) 9sc, 21ch, in the 17th loop from the hook we knit 1sc, 5sc along the chain from ch, 9sc (44)
10p) 8sc, 6ps, 4sc, inc, 7sc, inc, 3sc, 6ps, 8sc (46)
11-14r) 46sc (46)
Fasten the thread and cut. put aside
Shoe foot
1p) we dial 11ch, starting from 2 loops from the hook we knit: inc, 8sb, 3sc in 1 loop, 9sc (22)
2p) 2inc, 8sc, 3inc, 8sc, inc (28)
3p) (1sc, inc) x2, 8sc, (1sc, inc) x3, 9sc, inc (34)
4p) (2sc, inc) x2, 8sc, (2sc, inc) x3, 10sc, inc (40)
4p) (3sc, inc) x2, 8sc, (3sc, inc) x3, 11sc, inc (46)
Fasten the thread, cut, leaving a long thread for sewing. cut out of plastic or
cardboard insole. We fold the sole and top of the shoe inside out to each other and sew between
yourself, after inserting the insole. Stuff a shoe
Shaft
We attach a green thread in the center of the heel of the boot and knit the top
1p) 8sc, inc, 8sc (18)
2p) knit for p / n (2sc, inc) x6 (24)
3p) (3sc, inc) x6 (30)
4p) 7sc, 11ps, 12sc (30)
Fasten the thread, cut and hide the tip.
Legs
We knit in blue. We attach the thread in the center of the heel and knit for the remaining s / n of the 1st row of the bootleg
Left leg
1p) 18sc (18)
2p) (5sc, inc)x3 (21)
3p) (6sc, inc)x3 (24)
4-6r) 24sc (24)
7r) 3sc, inc, 3sc, inc, 16sc (26)
8p) 5sc, inc, 1sc, inc, 18sc (28)
9p) knit 23sc, fasten and cut the thread
Right leg
1p) 18sc (18)
2p) (5sc, inc)x3 (21)
3p) (6sc, inc)x3 (24)
4-6r) 24sc (24)
7r) 14sc, inc, 3sc, inc, 5sc (26)
8p) 17sc, inc, 1sc, inc, 6sc (28)
9r) 28sc (28)
Do not cut the thread. We will continue to knit the body with it
Body
1r) 3sc on the right leg, 2ch, 28sc on the left leg (we knit the first sc in the next loop after
last sc of the leg), 2sc along the ch chain, 25sc on the right leg (60)
2p) 13sc, inc, 4sc, inc, 14sc, 2inc, 14sc, inc, 4sc, inc, 5sc (66)
3p) 16sc, inc, (6sc, inc) x2, 14sc, inc, (6sc, inc) x2, 6sc (72)
4-7r) 72sc (72)
8r) knit for s/n 72sc (72)
9r) 72sc (72)
10r) (10sc, dec) x6 (66)
11r) 66sc (66)
12r) (9sc, dec) x6 (60)
13r) 60sc (60)
14r) (8sc, dec) x6 (54)
15r) 54sc (54)
16r) (7sc, dec) x6 (48)
17-19r) 48sc (48)
20r) (14sc, dec)x3 (45)
21r) (13sc, dec) x3 (42)
22r) (12sc, dec) x3 (39)
23r) (11sc, dec) x3 (36)
In the next row we will knit handles.
24r) 12sc, 8sc capturing the loops of the arm and body, 11sc, 6sc capturing the loops of the arm and body (36)
Knit another 2sc, capturing the loops of the arm and body and transfer the marker. Now here will be
the beginning of the row.
25r) 10sc on the body, 14sc on the arm, 11sc on the body, 14sc on the arm (49)
26r) 4sc, dec, 43sc (48)
27r) (4sc, dec) x8 (40)
28r) (3sc, dec) x8 (32)
29r) knit for s / n (2sc, dec) x8 (24)
Thread fasten and cut
Now we will knit the details of our gnome’s clothes
Bottom of the blouse
We knit with a blue thread, hold the gnome upside down and attach the thread in the center of the front to
the remaining p / n 7 rows of the body. We will knit in rotary rows.
1p) 72sc, 1ch lift, turn (72)
2p) (11sc, inc) x6, 1ch lifting, turn (78)
3p) (12sc, inc) x6, 1ch lifting, turn (84)
4-5p) 84sc, 1ch lift, turn (84)
Fasten and cut the thread, hide the tip.
Before blouse
We knit in white turning rows
1p) Dial 11ch, starting from 2 loops from the hook we knit: 10sc, 1ch lifting, turn (10)
2-4r) 10sc, 1ch lift, turn (10)
5r) dec, 6sc, dec, 1ch lift, turn (8)
6-7p) 8sc, 1ch lift, turn (8)
8p) dec, 4sc, dec, 1ch lift, turn (6)
9-11r) 6sc, 1ch lift, turn (6)
12r) dec, 2sc, dec, 1ch lift, turn (4)
13-16r) 4sc, 1ch lifting, turn (4)
After the last row, we do not turn the knitting, we tie the part in a circle, in the corners
we do the details in 2sc at 1 point. Fasten the thread and cut.
Next, we will knit the side straps in blue. We attach the thread in the place where we finished
knitting. We knit on the side of 16ss for white p / p. We do 1vp lifting turn and
we knit for the s / n row of ss 16sbn. Similarly, we knit the second side, only we attach the thread in the corner
bottom of the part.
We sew the detail to the body for the remaining half loops of a row of blue sl-st.
Cuffs
We knit in blue, attach the thread to the center of the inside of the arm to the remaining
half-loops of the handle in the place where they began to knit the sleeve.
1p) 18sc (18)
2p) (5sc, inc)x3 (21)
3p) 21sc (21)
4p) (6sc, inc) x3 (24)
5r) 24sc (24)
Fasten and cut the thread, hide the tip. On the second handle, tie the cuffs in the same way.
Collar
We knit in blue, attach the thread to the center of the front to the remaining stitches of the 28th row of the body.
At the same time, we keep the gnome’s body with its legs up. We will knit in rotary rows.
1p) (3sc, inc) x7, 3sc, 1ch lifting, turn (38)
2p) (4sc, inc) x7, 3sc, 1ch lifting, turn (45)
3p) 4sc, (inc, 5sc) x6, inc, 4sc, 1ch lifting, turn (52)
4-5r) 52sc, 1ch lift, turn (52)
6r) dec, 48sc, dec, 1ch lift, turn (50)
7p) dec, 46sc, dec, 7sc on the side of the collar, sl-st to the base of the body in the center of the collar,
7sc on the second side of the collar.
Fasten the thread and cut. Hide the tip.
Belt
Knit with brown yarn
1p) we collect 73ch, starting from 2p from the hook we knit 72sc, 1ch lift, turn (72)
2-3p) 72sc, 1ch lift, turn (72)
Fasten and cut the thread, leaving the tip for sewing.
Buckle
We knit with beige yarn
1p) 10ch, close in a circle and knit: (3sc in 1 loop) x2, 3sc, (3sc in 1 loop) x3, 3sc, sl-st
Fasten and cut the thread, hide the tip.
We attach the belt to the body, sew in a circle on the body, sew on the buckle

Head
Knit in flesh color
1p) 6sc in magic ring(6)
2p) 6inc (12)
3p) (1sc, inc) x6 (18)
4p) (2sc, inc) x6 (24)
5p) (3sc, inc) x6 (30)
6p) (4sc, inc) x6 (36)
7p) (5sc, inc)x6 (42)
8p) (6sc, inc) x6 (48)
9r) (7sc, inc) x6 (54)
10r) (8sc, inc) x6 (60)
11-18r) 60sc (60)
19r) 18sc, 9inc, 6sc, 9inc, 18sc (78)
20r) 22sc, inc, (3sc, inc) x2, 16sc, inc, (3sc, inc) x2, 22sc (84)
21-26r) 84sc (84)
27r) 9sc, dec, (1sc, dec) x8, 6sc, (3sc in 1 loop) x2, 6sc, dec, (1sc, dec) x8, 9sc (70)
28r) 4sc, dec, (9sc, dec) x2, 4sc, (dec of 3sc knitted together) x2, 3sc, dec, (9sc, dec) x2, 5sc
(60)
29r) 4sc, dec, (8sc, dec) x5, 4sc (54)
30r) (7sc, dec)x6 (48)
31p) 3sc, dec, (6sc, dec) x5, 3sc (42)
32r) (5sc, dec) x6 (36)
33r) 2sc, dec, (4sc, dec) x5, 2sc (30)
34r) (3sc, dec) x6 (24)
Fasten and cut the thread, leaving the thread for sewing. We fill the head, forming cheeks in
places 9 increments and a chin in the place where they knitted 3sc in 1 loop.
Spout
1p) 5ch, starting from 2 loops from the hook we knit: inc, 2sc, 3sc in 1 loop, 3sc on the reverse side
chains (10)
2p) 2inc, 2sc, 3inc, 2sc, inc (16)
3p) 1sc, inc, 7sc, inc, 6sc (18)
4-5r) 18sc (18)
6r) (1sc, dec)x6 (12)
Fasten and cut the thread, leaving the thread for sewing. Stuff the nose and sew in the area
row with 9 increments on each cheek.
Ears
1p) 6sc in magic ring (6)
2p) 6inc (12)
3p) (3sc, inc)x3 (15)
4-8p) 15sc (15)
9r) (3sc, dec) x3 (12)
10r) 12sc (12)
Fasten the thread, cut off, leaving a long thread for sewing and forming the ear shell.
Along the line where the yellow thread passes in the photo, we sew the eye through and through. Opening the ear
shown in the photo and sew to the head.

Depending on the purpose of the toy, we make out the face. If the toy is interior then
paint the eyes and mouth. If the toy is a game, then we make the eyes out of felt, and the mouth
we embroider.
With the help of elongated loops, we knit the hair in a spiral.
Sew the head to the body.
Beanie
We knit in red
1p) 6sc in magic ring (6)
2-7r) 6sc (6)
8p) (1sc, inc) x3 (9)
9-11r) 9sc (9)
12r) (2sc, inc) x3 (12)
13-14r) 12sc (12)
15r) (3sc, inc) x3 (15)
16-17r) 15sc (15)
18r) (4sc, inc) x3 (18)
19-20r) 18sc (18)
21r) (5sc, inc) x3 (21)
22-23r) 21sc (21)
24r) (6sc, inc) x3 (24)
25-26r) 24sc (24)
27r) (7sc, inc) x3 (27)
28r) 27sc (27)
29r) (8sc, inc) x3 (30)
30r) 30sc (30)
31r) (9sc, inc) x3 (33)
32r) (10sc, inc) x3 (36)
33r) (11sc, inc) x3 (39)
34r) (12sc, inc) x3 (42)
35r) (13sc, inc) x3 (45)
36r) (14sc, inc) x3 (48)
37r) (15sc, inc) x3 (51)
38r) (16sc, inc)x3 (54)
39r) (17sc, inc)x3 (57)
40r) (18sc, inc)x3 (60)
41r) (19sc, inc) x3 (63)
42r) (20sc, inc) x3 (66)
43r) (21sc, inc) x3 (69)
44r) (22sc, inc) x3 (72)
45r) (23sc, inc) x3 (75)
46r) (24sc, inc) x3 (78)
47r) (25sc, inc) x3 (81)
48r) (26sc, inc) x3 (84)
49r) (27sc, inc)x3 (87)
50r) (28sc, inc)x3 (90)
51-52r) 90sc (90)
53r) (8sc, inc) x10 (100)
54r) (4sc, inc) x20 (120)
55r) (5sc, inc)x20 (140)
56r) 140sc (140)
Fasten and cut the thread, hide the tip.
Pompom
We knit in white
1p) 6sc in magic ring (6)
2p) 6inc (12)
3p) (1sc, inc) x6 (18)
4p) (2sc, inc) x6 (24)
5-8p) 24sc (24)
9r) (2sc, dec)x6 (18)
10r) (1sc, dec)x6 (12)
Pompon fill
11r) 6dec (6)
Thread fasten the hole to pull. Sew a pompom to the hat.
Here is our gnome and is ready to please you

READY!




