Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Today’s daily new crochet pattern Amigurumi Handsome Twin Kids Free Crochet Pattern without amigurumi
I want to give you some information about this pattern;
Materials
• Sock weight yarn in light peach; pink and
sea green for girl, yellow and green for boy
• Eyelash yarn in black for boy
• Lace yarn or embroidery floss in brown and
black
• 2.5mm crochet hook
• Fiberfill
• Stitch markers
• Yarn needle & sewing needle
• 10mm safety eyes
• White felt
• A pair of scissors
• A pair each of 6mm buttons in dark green
and light green
• Green sewing thread
• Pearl headed pins
Finished size: 8 inch
Skill level: Intermediate
Terminology (US)
magic ring
ch (chain)
st (stitch)
sc (single crochet)
hdc (half double crochet)
dc (double crochet)
inc (increase)
dec (decrease)
BLO (back loop only)
FLO (front loop only)
4-dc bobble st
Loop stitch
sl st (slip stitch)
YO (yarn over)
4-dc bobble st
BOOT (make 2)
With pink yarn [for girl] or yellow [for boy], ch 6.
Round 1: Starting from second ch from the hook, sc 4,
3 sc in the last ch. Continuing on the opposite side of
the foundation chain, sc 3, 3 sc in the last ch. (13)
Round 2: sc 4, inc in the next 3 st, sc 3, inc in the last 3
st. (19)
Round 3: sc 6, inc in the next 3 st, sc 7, inc in the last 3
st. (25)
Round 4: Working in BLO, sc around. (25)
Round 5-6: sc around. (25)
Round 7: sc 2, dec x 6, sc 11. (19)
Round 8: sc 1, dec X 4, sc 10. (15)
Round 9-10: sc around. (15)
Round 11: Mark the back loop of the next st. sl st
in the front loop of the same st and ch 1. FLO hdc
around. sl st in the next st to join. (15)
Fasten off. Weave in yarn end.
LEG (make 2)
Fold the boot cuff outwards to reveal the unworked
back loops of Round 11. Join sea green [for girl] or
green [for boy].
Round 1-7: sc around. (15)
Fasten off, leaving a long tail (this will be used later to
sew the gap between the doll’s legs). Count back from
the end of the round and mark the eighth st. Stuff. Make the second leg and stuff but do not fasten of
BODY [boy]
We will continue working on the second leg and join
the legs in the next round.
Round 1: ch 2, sc in the marked st of the first leg, sc in
the next 14 st. ch 3, sc in all 15 st of the second leg. (35)
Round 2: sc in each of the next 2 ch, sc 15, inc in each
of the next 3 ch, sc 15. (38)
Round 3: sc 17, (sc 2, inc) X 2, sc 15. (40)
Round 4: (sc 4, inc) X 8. (48)
Using a yarn needle and the yarn tail you had left at
the last round of the first leg, sew the gap between the
doll’s legs.
Round 5-6: sc around. (48)
Round 7: With yellow, sc around. (48)
Round 8: (sc 6, dec) X 6. (42) Fasten off this color and
work with green from the next round onwards.
Round 9: With green, sc around. (42)
Round 10: (sc 5, dec) X 6. (36)
Round 11: sc around. (36)
Round 12: (sc 4, dec) X 6. (30)
Round 13: sc around. (30)
Round 14: (sc 3, dec) X 6. (24)
Stuff.
Round 15-20: sc around. (24)
Round 21: (sc 2, dec) X 6. (18)
Stuff.
Round 22: With light peach, (sc 1, dec) X 6. (12)
Round 23-30: sc around. (12)
It is very important to stuff the neck as firmly as possible
at this point so it can support the weight of the head.
Round 31: dec X 6. (6)
Fasten off, leaving a long tail. Using your yarn needle,
weave the yarn tail through the front loop of each
BODY [girl]
We will continue working on the second leg and join
the legs in the next round.
Round 1: ch 2, sc in the marked st of the first leg, sc in
the next 14 st. ch 3, sc in all 15 st of the second leg. (35)
Round 2: sc in each of the next 2 ch, sc 15, inc in each
of the next 3 ch, sc 15. (38)
Round 3: sc 17, (sc 2, inc) X 2, sc 15. (40)
Round 4: (sc 4, inc) X 8. (48)
Using a yarn needle and the yarn tail you had left at
the last round of the first leg, sew the gap between the
doll’s legs.
Round 5-7: sc around. (48)
Round 8: (sc 6, dec) X 6. (42)
Round 9: With pink, sc around. (42)
Round 10: (sc 5, dec) X 6. (36)
Round 11: sc around. (36) Fasten off this color and work
with sea green from the next round onwards.
Round 12: With sea green, (sc 4, dec) X 6. (30)
Round 13: sc around. (30)
Round 14: (sc 3, dec) X 6. (24)
Stuff.
Round 15-20: sc around. (24)
Round 21: (sc 2, dec) X 6. (18)
Stuff.
Round 22: With light peach, (sc 1, dec) X 6. (12)
Round 23-30: sc around. (12)
It is very important to stuff the neck as firmly as possible
at this point so it can support the weight of the head.
Round 31: dec X 6. (6)
Fasten off, leaving a long tail. Using your yarn needle,
weave the yarn tail through the front loop of each
remaining stitch and pull it tight, closing off the neck.
Weave in the yarn end.
CHEST PATCH
Round 1: With pink [for girl] or yellow [for boy], 6 sc in
a magic ring. (6)
Round 2: inc X 6. (12)
Round 3: (sc 1, inc) X 6. (18)
Fasten off, leaving a long tail. Thread a yarn needle with
the tail and sew this circular patch on the doll’s chest.
ARM (make 2)
Round 1: With light peach, 6 sc in a magic ring. (6)
Round 2: Inc in all 6 st. (12)
Round 3: (sc 1, inc) X 6. (18)
Round 4-5: sc around. (18)
Round 6: 4-dc bobble st, dec, (sc 1, dec) X 5. (12)
If you are unfamiliar with this stitch, this pattern includes a section on how to make a 4-dc bobble stitch.
Round 7: sc around. (12)
Round 8-12: With sea green [for girl] or green [for
boy], sc around. (12)
Round 13: (sc 2, dec) X 3. (9)
Round 14-16: sc around. (9)
Round 17-18: With pink [for girl] or yellow [for boy], sc
around. (9) Fasten off this color.
Round 19-21: With sea green [for girl] or green [for
boy], sc around. (9)
Round 22: dec X 4, sc 1. (5)
Fasten off, leaving a long tail. Stuff with fiberfill. Using
your yarn needle, weave the yarn tail through the
front loop of each remaining stitch and pull it tight,
closing off the gap. Weave in yarn end.
Sew the arms on Round 20 on the body. Make sure
the thumbs are facing towards you.
HEAD
Before we start working on the head, we will cut out
two round pieces from white felt. These pieces should
be slightly bigger than the safety eyes you are using.
Make a hole slightly off center and insert eye through
the hole. Keep these aside.
Round 1: With light peach yarn, 8 sc in a magic ring. (8)
Round 2: inc in all 8 st. (16)
Round 3: (sc 1, inc) X 8. (24)
Round 4: (sc 2, inc) X 8. (32)
Round 5: (sc 3, inc) X 8. (40)
Round 6: (sc 4, inc) X 8. (48)
Round 7: (sc 5, inc) X 8. (56)
Round 8-17: sc around. (56)
Round 18: (sc 5, dec) X 8. (48)
Round 19: (sc 4, dec) X 8. (40)
Round 20: (sc 3, dec) X 8. (32)
Round 21: (sc 2, dec) X 8. (24)
Insert eyes between Round 15 and 16, 10 stitches apart.
Round 22: dec X 12. (12)
Fasten off, leaving a long tail. Stuff head, leaving
some space in the center for the neck that will be
inserted later.
EYELINER / EYEBROWS
Thread a yarn needle with brown lace yarn or
embroidery floss, insert needle from the neck opening
and embroider lash line for the girl and eyebrows for
the boy as seen in the picture.
EAR (make 2 for boy)
With light peach yarn, in a magic ring sc, 2 hdc, sc.
Fasten off and sew on either side of the face.
JOIN HEAD TO BODY
To make the head of your amigurumi movable, thread
light peach yarn and insert the needle from the center
of the magic ring on the head and out from the neck
opening [see figure 1]. Count down 8 rounds from the
top of the neck. Now insert your needle through the
neck at this point, back through the neck opening on the
head, bringing it out again from the magic ring on the
head. Slide the head down the two strands of yarn until
it sits perfectly on the neck. Knot the yarn ends together a few times to secure. Clip off excess yarn.
MOHAWK [for boy]
Round 1: With black eyelash yarn, ch 5. Starting from
the second ch from the hook, sc 4, ch 1, turn. (4)
Round 2-19: sc 4, ch 1, turn. (4)
Round 20: sc 4.
Fasten off. Thread a yarn needle with black lace yarn/
embroidery floss, sew the hair on head.
WIG [for girl]
With sea green yarn, follow instructions for head from
Round 1-15.
Fasten off, leaving a very long tail to sew.
Slip wig on the head, making sure the stitch at the end
of the yarn tail is positioned above the left eye [pic 1].
Sew the wig in place. Do not clip off excess yarn tail.
We will use it to work on the fringe.
FRINGE [for girl]
The fringe is embroidered on the head as shown in pic 2.
Mark the area where you want to make the first
cluster of fringe [pic 3]. See the triangle formed by the
pearl headed pins? This is where we will make the first
cluster. The starting point of the yarn is A. Make a tiny
stitch on the point B.
Next, insert needle on the ch on the wig next to point
A [pic 4]. Make another stitch on point B [pic 5].
Then on the wig next to where you made the last
stitch [pic 6]. Continue working in this manner until
you cover the area between the three points [pic 7].
The idea is to keep covering the hairline while the
tips of the fringe is sewed into the same spot [pic 8].
We will repeat this process until there are around 4
clumps of fringes on the right side of the forehead.
Then we will repeat the process on the left side.
HAIR STRANDS [for girl]
Now, we will work on the hair strands over the wig.
Thread yarn needle with sea green yarn. Insert needle
from any point in the head and bring it out from the
magic ring on the wig. Make a small tack here to
secure the yarn. Next, insert needle at the hairline of
the wig as shown in the image [pic 9].
Now make another stitch at the magic ring [pic 10].
Leave a gap of a few stitches and make another stitch
at the hairline of the wig and then back at the magic
ring [pic 11]. Continue doing this till the entire wig is
covered. Fasten off and weave in yarn ends.
PIGTAILS [make 2, for girl]
To make the doll’s pigtails, we will work a 6 inch loop
stitch in each stitch on every row.
Round 1: With sea green yarn, 6 sc in a magic ring. (6)
Round 2: Making a 6 inch loop st in each stitch, inc in
all 6 st. (12)
Round 3: Making a 6 inch loop st in each stitch, (sc 1,
inc) X 6. (18)
Fasten off. Position the pigtails on the head, hold them
in place with pearl headed pins and sew in place [pic
12]. Cut open the loops and trim as required
EYE MASK [for boy]
Step 1: With yellow, ch 21. Mark the 11th (B) and the
21st (C) stitch from the hook [figure 2].
Step 2: Ch 12, sl st in the st marked B (and mark this
stitch again), ch 12, sl st in the 1st stitch (A) [figure 3].
Step 3: 2 sc in the stitch marked A, sc 6, sl st in the
next 7 st, sc 6, 2 sc in the last st (or the stitch marked
as C), (sc 3, inc) X 2, sc 1, sl st in the next 7 st, sc 1,
(inc, sc 3) X 2, sl st in the next st (or the stitch marked
as A), ch 1, turn [figure 4].
Now, we will work on the straps.
Row 1-3: sc 4, ch 1, turn. (4)
Row 4: dec X 2, ch 1, turn. (2)
Row 5-34: sc 2, ch 1, turn. (2)
Fasten off.
For the second strap, join yarn on the stitch marked as
C and follow Row 1-34. Place the eye mask over the
eyes and tie the straps at the back of the head.
CAPE
Row 1: With pink [for the girl] or yellow [for the boy]
yarn, ch 16. Starting from the second ch from the
hook, sc 15, ch 1, turn. (15)
Row 2: inc, sc 13, inc, ch 1, turn. (17)
Row 3-4: sc 17, ch 1, turn. (17)
Row 5: inc, sc 15, inc, ch 1, turn. (19)
Row 6-7: sc 19, ch 1, turn. (19)
Row 8: inc, sc 17, inc, ch 1, turn. (21)
Row 9-10: sc 21, ch 1, turn. (21)
Row 11: inc, sc 19, inc, ch 1, turn. (23)
Row 12-13: sc 23, ch 1, turn. (23)
Row 14: inc, sc 21, inc, ch 1, turn. (25)
Row 15-16: sc 25, ch 1, turn. (25)
Row 17: inc, sc 23, inc, ch 1, turn. (27)
Row 18-19: sc 27, ch 1, turn. (27)
Row 20: inc, sc 25, inc, ch 1, turn. (29)
Row 21-22: sc 29, ch 1, turn. (29)
Row 23: sc 29, ch 1. Do not turn.
sc along the row end, making 1 st per row [figure 5]. Sl
st in the first ch of the foundation row, ch 6, sl st in the
next 13 ch, ch 6, sl st in the last ch. sc along the next
row end, ch 1, sl st in the first st. Fasten off, weave in
yarn ends.
Sew 6mm buttons on the front of the body, next to
where you joined the arms. Place the cape over the
shoulders and slip the loops under the buttons to hold
it in place.
