Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today, the new daily crochet pattern Amigurumi, Amigurumi Cat Twins Free Crochet Pattern Crochet Pattern, I want to give you some information about this pattern;

Abbreviations:

VP – air loop

sl-st – connecting post

inc – inc bonus

dec – decavka

sc – single crochet

hdc – half double crochet

dc – double crochet

sl-st2н – double crochet stitch

ZZS – behind the back wall of the loop ZPS – behind the front wall of the loop

ring – amigurumi ring

Materials:

Hooks 2.75mm and 3.25mm.

Filler

Scissors

Tapestry needle

Row marker

Safety eyes 10mm

Black thread

İncie Scheepjes Catona (Sport) 100% cotton, 123m/50g:

For the gray version of Cora, colors: 172 Light Silver, 105 Bridal White, 264 Light Coral, 252 Watermelon. (red), 397 Cyan (golden), 146 Vivid Blue (blue), 222 Tulip (pink).

For the white version , colors: 105 Bridal White (white), 257 Antique Mauve (light brown), 385 Crystalline (turquoise), 253 Tropic (golden), 403 Lemonade (yellow), 249 Saffron (dark yellow).

Head (hook 2.75mm) Change colors according to the instructions after the total number of stitches

1. grey, 6sc in ring (6)
2. 6 inc (12) (of which: gray 5sc, white 4sc, gray 3sc)
3. (sc, inc)*6 (18) (of which: gray 7sc, white 8sc, gray 3sc)
4. (2sc, inc)*6 (24) (of which: gray 9sc, white 11sc, gray 4sc)
5. (sc, inc, 2sc)*6 (30) (of which: gray 12sc, white 13sc, gray 5sc)
6. (4sc, inc)*6 (36) (of which: gray 14sc, white 16sc, gray 6sc)
7. (2sc, inc, 3sc)*6 (42) (of which: gray 16sc, white 19sc, gray 7sc)
8. (6sc, inc)*6 (48) (of which: gray 18sc, white 22sc, gray 8sc)
9. (3sc, inc, 4sc)*6 (54) (of which: gray 20sc, white 25sc, gray 9sc)
10. 54sc (54) (of which: gray 20sc, white 25sc, gray 9sc)
11. (8sc, inc)*6 (60) (gray 23sc, white 26sc, gray 11sc)
12. 60sc (60) (gray 23sc, white 26sc, gray 11sc)
13. 60sc (60) (gray 24sc, white 25sc, gray 11sc)
14. 60sc (60) (gray 25sc, white 23sc, gray 12sc)
15. 60sc (60) (gray 26sc white 21sc, gray 13sc)
16. 60sc (60) (gray 28sc, white 17sc, gray 15sc)
17. 60sc (60) (gray 30sc, white 12sc, gray 18sc)
18. 60sc (60) (gray 33sc, white 8sc, gray 19sc)
19. 60sc (60) (gray 36sc, white 3sc, gray 21sc)

20-26. grey, 60sc (60)

• (8sc, dec)*6 (54)
• (3sc, dec, 4sc)*6 (48)
• (6sc, dec)*6 (42)

Insert eyes in row 21-22, 10 stitches between eyes. Embroider eyebrows diagonally in the 17th row, 1 loop long. Embroider the nose between the eyes in rows 21-22, the nose should be triangular in shape and 3 loops long. From the middle of the nose, pour a vertical line 2 loops wide. Embroider a mustache under the eyes, 2 loops wide. Sew the first mustache in the 23-24th row, and the second in the 25th row.

• (2sc, dec, 3sc)*6 (36)
• (4 sc, dec)*6 (30)
• (sc, dec, 2sc)*6 (24)

Finish

Ears (make 2, hook 2.75mm) Make one ear gray, one ear white

1. 6sc per ring (6)
2. (sc, inc)*3 (9)
3. (2sc, inc)*3 (12)
4. (sc, inc, 2sc)*3 (15)
5. (4sc, inc)*3 (18)
6. 5sc, 3sc in 1 loop, 12sc (20) 7. 6sc, 3sc in 1 loop, 13sc (22)

8. 7sc, 3sc in 1 loop, 14sc (22)

Leave the thread for incision. Don’t stuff. Sew in rows 5-15 of the head. 10 loops between ears.

Headband (hook 2.75mm)

1. coral, 100 VP, from 2 from hook: sl-st, sc, hdc, dc, (dc, 2 VP, sl-st in 1 loop), 89 sl-st, (sl-st, 2 VP, dc in 1 loop), dc, hdc, sc, sl-st (105) Finish. Place on your head, tie the ends near your left ear. The bottom should not be in the center so that the body can be incised. You can make a couple of stitches to sew the headband to the head.

Legs (make 2, hook 2.75mm)

Change color on rows 7-12 for one leg according to the instructions after the total number of stitches. There is no need to change color for the other leg.  

1. coral, 6sc in ring (6)
2. 6 inc (12)

3-5. 12sc (12)

6. red, 12sc (12)

7-8. white, 12sc (12)

• (5sc, inc)*2 (14) (white 12sc, gray 2sc)
• 14sc (14) (gray 5sc, white 6sc, gray 3sc)
• 14sc (14) (gray 6sc, white 4sc, gray 4sc)
• 14sc (14) (gray 7sc, white 2sc, gray 5sc)

13-15. grey, 14sc (14)

16. (6sc, inc)*2 (16)

17-22. 16sc (16)

23. (7sc, inc)*2 (18)

24-29. 18sc (18)

Stuff, finish the first leg here. From the second leg:

Fold in half and inc knit 9 sl-st on both sides, cast on 6 ch, inc join the leg, fold the leg in half and inc knit together 9 sl-st. Finish.

(A contrasting thread is used in the photo for clarity)

 Body

To knit the body, we will use both stitches of the 29th row of legs, as well as with the front and back loops of the VP chain.

This will be row 30. İncconnect the gray inc to the back of the first leg (Photo 31).

Make a sc in each loop around the two legs and ch chains (if you work in this direction, be careful not to twist the second leg). This row contains 48 stitches (photos 32, 33, 34 and 35). You should keep in mind that at the end of both legs there are two very difficult stitches that you will need to knit together. Knit them carefully and remember that there are 18 loops on each leg (9 loops on each side) + 12sc in VP.

• 48sc (48)
• (3sc, inc, 4sc)*6 (54)

33-39. 54sc (54)

40. (3sc, dec, 4sc)*6 (48)

41-44. 48sc (48)

45. (6sc, dec)*6 (42)

46-48. 42sc (42)

49. (2sc, dec, 3sc)*6 (36)

50-51. 36sc (36)

52. (4sc, dec)*6 (30)

53-54. 30sc (30)

55. (sc, inc, 2sc)*6 (24)

56-58. 24sc (24)

Finish, leave the thread for incision.

Hands (make 2, hook 2.75mm)

1. grey, 6sc in ring (6)
2. 6 inc (12)

3-28. 12sc (12)

Leave the thread for incision. Stuff it a little. Sew in rows 54-55.

Tail (hook 2.75mm)

1. grey, 6sc in ring (6)
2. (sc, inc)*3 (9)

3-42. 9sc (9)

Finish, leave the thread for incision. Don’t stuff.

In order to change the position of the tail, insert a chenille (fluffy) incovolok inside. If you don’t insert an incline, you can incwork a few more rows for a more dynamic tail. Sew in row 37.

Pants (hook 3.25mm) Leave a tail of thread at the beginning of the row

1. red, 42 VP, close in a ring: (VP, sc in 1 loop), 41 sc (43)
2. 42sc (42)
3. (6sc, inc)*6 (48)
4. 4 VP, inc, skip 4 loops, inc, (7sc, inc)*5, 3sc (54)
5. in VP we knit without inc, (8sc, inc)*6 (60)
6. (4sc, inc, 5sc)*6 (66)

7-14. 66sc (66)

Finish. Join the thread into the 3rd loop of the 14th row:

1. (VP, sc in 1 loop), 32sc (34) in the middle inc and connect to inc on the opposite side (see photo)
2. 16 dec, sc (17)
3. (sl-st, 3 VP in 1 loop) * 17 Finish.

For the second leg, inc join the thread of the 34th loop of the 14th row (leaving a long tail at the beginning), knit:

1. (VP, sc in 1 loop), 31sc (33)
2. 16 Dec (16)
3. (sl-st, 3 VP in 1 loop) * 16 Finish.

Sew up the hole between the legs

Now, using a needle and inc from the beginning of the main VP, make an invisible connection between the first and last VP (photo 47 and 48).

Finally, tying the top edge, turn the trouser legs to face you,.

Fasten the red inc to the back of the base, knit: 1. (sl-st, 3 VP in 1 loop) *to the end

Top (hook 3.25mm) Leave the thread at the beginning of the row

1. coral, 35 VP, with 3 from the hook: 33 hdc, sl-st (34)
2. (16 hdc, inc hdc)*2 (36)

3-5. 36 hdc (36)

• 2 VP, (1 front convex hdc, 1 purl convex hdc)*18, sl-st

(37)

Finish

Now, using a needle and working from the beginning of the main VP, make an invisible connection between the first and last VP.

Turn row 6 towards you. Join the coral thread in 1 VP and knit:

• 6 sl-st, 6 VP, inc omit 4 loops, 14 sl-st, 6 VP, inc omit 4 loops, 6 sl-st

(38)

Finish

Next we tie the top of the top. Crochet 2.75mm.

Connect the coral thread at the back of the 7th row, knit:

• (3 dc in 1 loop) * across all sl-st and VP ince of the previous row, sl-st (115) Finish.

Fish bag (make 2 parts, hook 2.75mm)

1. golden, 4 VP, from 2 from hook: 2sc, 3sc in 1 loop, 3sc (8)
2. inc, sc, 3 inc, sc, 2 inc (14)
3. sc, inc, sc, (sc, inc)*3, sc, (sc, inc)*2 (20)
4. 2sc, inc, sc, (2sc, inc)*3, sc, (2sc, inc)*2 (26)
5. 3sc, inc, sc, (3sc, inc)*3, sc, (3sc, inc)*2 (31) Finish. We make fins on only 1 part.

Dorsal

Join the blue thread into the 6th loop of the 5th row of 1 piece, knitting:

1. (VP, sc in 1 loop), (inc dc, hdc, sc in 1 loop), (VP, sl-st in 1 loop)

Finish

Tail

Join the blue thread into the 15th loop of the 5th row of the 1st part, knitting:

1. (3 VP, dc, 3 VP, sl-st in 1 loop), (sl-st, 4 VP, inc sl-st2н, 4 VP, sl-st in 1 loop)

Finish

Pectoral fin (hook 2.75mm)

1. blue, 4 VP, from 2 from hook: sc, inc hdc, (sc, VP, sl-st in 1 loop) (6) Finish, leave thread for inching. Sew in rows 2-3, only the top part of the fin

Embroider the eye of the fish in rows 1-3, blush 2 rows from the eye.

Bag trim (hook 2.75mm)

Take the two pieces of the bag and fold both pieces wrong sides together (I put the side without the fins facing me). When placing two parts, you must try to combine the increments of the 5th row of both parts (photo 54).

Now you need to attach the new tie to connect both parts. For your convenience, the author attached the thread to the 28th loop of the 5th row of the first part. Keep in mind that you will have to insert the hook into the loops of both pieces (photo 55). Knit 20 sl-st

Finish (photo 56).

Keep in mind that the top of the bag must be open (photo 57).

Bag handle (hook 2.75mm) 

To make a handle, at the end of the inc seam of the bag, connect a new gold inc and perform 55 ch. İncconnect the other end of the handle to the bag, making a sl-st at the other end (make sure that the chains do not twist), finish, tie the thread.